banner

제품

ISO9001 중국 제조업체 450/750V 24 AWG 난연성 유연한 멀티 코어 구리 도체 고무 차폐 PVC 절연 LSZH 제어 케이블 와이어 가격

ISO9001 중국 제조업체 450/750V 24 AWG 난연성 유연한 멀티 코어 구리 도체 고무 차폐 PVC 절연 LSZH 제어 케이블 와이어 가격

개요 제품 설명 적용 제어 케이블은 제어 장비 및 모니터 장비의 연결에 적합하며 기계 장치의 전원 및 연결 케이블로도 사용됩니다.
공유하다

설명

Overview
기본 정보
모델 번호.kvv wdzn-kvv
와이어 코어 소재빨간색 또는 베어 구리선
인증ISO, CCC, CE, RoHS, VDE
모델Kvv/Kvv22/Kvvr/Zc-Kvv
상표옌퉁
기준ISO9001, ISO14001, ASTM BS DIN GB
거래기간Fob, CRF, CIF, EXW
견본무료
애프터 서비스지원하다
배달 시간5-30 일
MOQ500미터
지불 기간 2보자마자 30% 예금+70% L/C 취소 불가
지불 기간 130% 입금+발송 전 잔액
서비스 수명50년
외장 여부외장 또는 외장 없음
갑옷의 종류테이프 또는 와이어
색상블랙/레드/옐로우/블루
코어 수멀티코어
무장 여부기갑 또는 비무장
알과 함께구리
운송 패키지표준 항해에 적합한 패키지

25 dbr Multi-core cable (d): D > 20 d.br5.4 The selection of the delivery tray is based on the premise that the tube diameter meets the requirements of the bending radius of the installed cables, and its size should be compatible with the delivery length and specifications of the cables.br6. Packaging of coiled cables (wires)br6.1 Disk loading requirementsbr6.1.1 Generally, cables (wires) should be delivered in coils one by one, and the length should not be less than 100 m.br6.1.2 It is allowed to deliver short cables (wires) in platters with a length of less than 20 m, and the quantity should not exceed 10% of the total delivery length.br6.1.3 According to the agreement between the two parties, it is allowed to deliver cables (wires) of any length.br6.1.4 Meter counters shall be used for length measurement, and the error shall not exceed ± 0.5%.br6.1.5 The products are neatly arranged in a tray, and the distance between the outermost layer and the edge of the tray should not be less than 50 mm.br6.1.6 If multiple cables (wires) are allowed to be delivered as a platter, the length of each cable (wire) from inside to outside shall be indicated on the certificate of conformity.br6.2 Disposal of cable (wire) endbr6.2.1 The end of the coiled cable (wire) should pass through the oblique hole on the side plate of the delivery tray, and the length should not be less than 300mm.br6.2. 2 The cable (wire) head should be reliably sealed to ensure that the cable (wire) end does not enter water.br6.2.3 If multiple platters are allowed to be delivered, the tail end of the previous one and the front end of the rear root shall be connected by ropes.br6.3 Protectionbr6.3.1 After the cable (wire) is coiled, its outermost surface should be covered with a layer of moisture-proof paper, felt or burlap as an inner protective layer.br6.3.2 Appropriate outer protective layer should be used for protection outside the inner protective layer. The outer protective layer can be made of bamboo curtains, bamboo guard boards or other equivalent materials, and its width should be 5 mm to 10 mm smaller than the inner width of the corresponding delivery tray. mm, its length should be determined according to the loading capacity.br6.3.3 According to the agreement of both parties, it is allowed to use any method of protection.br6.3.4 Two layers of plastic strapping (with a width of about 15 mm and tightened tightly) should be applied outside the outer sheath./p>

당사 연락처